矿热炉炉壳安装作业危险性分析

为减少事故损失,必须对矿热炉安装施工危险源进行分析。基于此,对矿热炉安装工序中最重要工序炉壳安装应用作业危险性分析进行分析。将炉壳安装作业分成3大部分,用鱼刺图分析方法进行分析,总结出矿热炉炉壳安装中事故发生的主要原因并提出对策措施,以预防和减少事故的发生。     

Quantifying the impact of vegetation-based metrics on species persistence when choosing offsets for habitat destruction

Developers are often required by law to offset environmental impacts through targeted conservation actions. Most offset policies specify metrics for calculating offset requirements, usually by assessing vegetation condition. Despite widespread use, there is little evidence to support the effectiveness of vegetation-based metrics for ensuring biodiversity persistence. We compared long-term impacts of biodiversity offsetting based on area only; vegetation condition only; area × habitat suitability; and condition × habitat suitability in development and restoration simulations for the Hunter Region of New South Wales, Australia. We simulated development and subsequent offsetting through restoration within a virtual landscape, linking simulations to population viability models for 3 species. Habitat gains did not ensure species persistence. No net loss was achieved when performance of offsetting was assessed in terms of amount of habitat restored, but not when outcomes were assessed in terms of persistence. Maintenance of persistence occurred more often when impacts were avoided, giving further support to better enforce the avoidance stage of the mitigation hierarchy. When development affected areas of high habitat quality for species, persistence could not be guaranteed. Therefore, species must be more explicitly accounted for in offsets, rather than just vegetation or habitat alone. Declines due to a failure to account directly for species population dynamics and connectivity overshadowed the benefits delivered by producing large areas of high-quality habitat. Our modeling framework showed that the benefits delivered by offsets are species specific and that simple vegetation-based metrics can give misguided impressions on how well biodiversity offsets achieve no net loss.     

室内空气和灰尘中全(多)氟烷基化合物的研究进展

全(多)氟烷基化合物(per(poly)fluoroalkyl substances,PFASs)在环境各个介质及人体样品中广泛被检出,近年,在室内空气和灰尘中也普遍发现PFASs.研究表明,室内空气中PFASs的含量普遍高于室外空气,室内空气和灰尘中的PFASs可能是室外空气的污染来源及人体暴露源,因此室内环境中PFASs成为环境领域的又一个研究热点.但目前为止,我国还没有开展室内空气中PFASs的相关研究,室内灰尘中PFASs的研究也相对较少.本文就室内空气和灰尘中PFASs的采样与分析方法、污染现状、来源分析及人体暴露等4个方面进行了综合阐述,以期为我国室内环境中PFASs的研究提供参考.     

太原汾河景区跨桥断面水体污染的时空变化模式研究

选取太原汾河景区跨桥断面8个监测点,在2012年3月—2013年10月期间对河流8项水质参数进行监测,并结合派生的水体综合污染指数及主成分分析方法分析和评价景区水污染时空变化特征。结果表明,景区水质污染变化时空差异明显,上游污染相对较小,下游污染较重;春季溶解氧和p H值变化幅度最大,夏季除总氮和氨氮外,其他各污染物均有显著变化特征,秋季则以氨氮、总氮和总磷变化最为显著。主成分分析结果显示,虽然各监测点水体污染的关键影响因子不同,但总磷是太原市河流水体污染的共同解释因子。     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

基于压力响应关系法的湖泊营养物基准制定

湖泊富营养化与氮、磷及有机物含量过高密切相关,建立数字型营养物基准能够防止富营养化对水体指定用途造成影响.太湖流域是我国华东地区经济腹地,近年来流域内湖泊水质每况愈下,对其基准研究可为湖泊治理提供依据.详细介绍了压力响应关系法制定湖泊营养物基准的步骤,并将此方法运用到太湖流域营养物基准制定研究中.为满足大多数水体指定用途,研究中将该流域湖泊基本功能确定为娱乐、永生生物栖息地及饮用水,以此构建流域概念模型.选择压力变量为总氮(TN)、总磷(TP)和有机物,响应变量为叶绿素a(chl-a).用非参数分析法和线性回归法分别建立压力-响应模型,通过2种方法相互验证得到TN、TP和CODMn基准分别为0.593、0.067和4.092 mg/L.     

多波长法用于减小浊度对水源水中甲醛测定结果的影响

比较了减小水样浊度对样品结果影响的各种方法,包括过滤法、双波长法、三波长法,3种方法均基于乙酰丙酮分光光度法,测定波长均为414 nm。结果表明,以480 nm为参比波长的双波长法所得方法检出限为0.027 mg/L,采用470 nm与360 nm、460 nm与370 nm、450 nm与380 nm 3对参比波长的三波长法测得方法检出限为0.025~0.028 mg/L,这些方法用于检测0.100 mg/L标准点样品时,检测结果 RSD介于8.0%~8.6%。双波长法适合低浊度样品的直接分析,而浊度较高或双波长法测得结果大于方法检出限时,应采用三波长法进行定量分析,他们的使用有助于提高方法的准确度及减少工作量。用于地表水样品分析时,0.200、0.400 mg/L加标样品的回收率介于90.3%~101%,对应RSD介于0.0%~4.2%。     

基于复杂系统建模的水管理政策研究进展

基于Agent的建模方法（ABSS）通过自下而上的方式，考察系统中主体的不同状态和行为特征、主体与环境的作用、主体之间的作用，来表征系统的宏观特征，是进行复杂社会环境系统分析和政策研究的重要手段，在水资源、水环境管理系统中得到了有效的应用。本文在大量文献调研的基础上，讨论了ABSS建模方法的基本原理、主要特征、系统构成、分类方法和开发工具等特征，总结了其供水系统发展、水资源分配和流域水资源管理、农业土地和水资源利用、居民用水行为、农业污染控制及人类活动的水环境影响等方面的应用，分析了其在研究内容、研究方法、研究结果等方面的发展趋势，讨论了利用该方法研究我国水资源管理和水污染控制政策的必要性和重要性。     

利用3S技术动态监测天山草地农业产量及其成因分析

在新疆阜康县大量“天地”资料观测基础上，利用3S(RS、GIS和GPS)技术和生态系统分析方法，对新疆天山草地农业资源进行了系统的动态监测和大面积估产研究。结果表明，该县草地和森林面积1998年比1988年分别下降了17．5％和51．o％，而农业用地面积和沙漠危害面积却分别增加了57．8％和21．2％，实现了利用3s技术系统准确监测新疆阜康县草地农业资源动态变化，其大面积草地遥感估产精度达到75．8％以上。最后，建立了新型PPR估产模型，其估产精度达到81．76％以上，并给出了理论生态成因解释与定量分析结果等。     

张家界国家森林公园地表水污染综合分析

随着旅游业的快速发展,张家界国家森林公园水环境保护、水污染治理及水资源利用问题已成为张家界旅游可持续发展中突出的问题.文章利用大量监测数据,对公园地表水污染状况进行模糊数学法综合评价,进行污染特征与污染规律分析,从而提出严格控制排污,科学规划水资源、严格控制景区客流量等对策及建议,以期为张家界国家森林公园水环境保护及张家界旅游业的持续健康发展提供决策参考.